KPS MT20L Manual De Funcionamiento página 19

KPS-MT20L • Non-contact voltage detector
Conforms to european union directive
Earth ground
CA Alternating current
CC Direct current
AC or DC (alternating current or direct)
Diode
Continuity buzzer
M.H The maximum value is being held.
D-H This indicates that the display data is being held.
AUTO Auto range
The battery is not sufficient for proper operation.
1.4 Maintenance
• Please do not attempt to adjust or repair the meter by removing the rear
case while voltage is being applied. A technician who fully understands dan-
ger involved should only carry out such actions.
• Before opening the battery cover or case of the meter, always disconnect the
tip of meter and the probe of the test lead (or test clip) from all tested circuits.
• To avoid the wrong reading causing electricity attack, when the meter dis-
plays " ", you must change the battery.
• Do not use abrasives or solvents on the meter, use a damp cloth and mild
detergent only.
• Always set the transform switch to the OFF position when the meter is not
in use.
• If the meter is to be stored for a long period of time, the batteries should be
removed to prevent damage to the unit.
2. DESCRIPTION
• This meter is a portable professional measuring instrument with handsome
LCD easily reading.
19