WARNING! Small parts for
assembly by an adult.
Tools Required (included in the
packaging)
Swing Assembling
1.Swing arrives in
2.Put the swinging
4pcs tubes, and 2
body on the floor,
hanging ropes, a
and put the 4 Velcro
swinging body for
covers in the
assembly.
direction of black
mat.
4.Put the arched tube
5. Insert the straight
like this.
tube into the sleeve;
connect two tubes
by small socket to
big socket. Repeat it
until all the tubes
connected.
04
3.Insert the arched
tube with foam into
the sleeve firstly.
6.Repeat step 4 and
5 until all the tubes
are inserted.
Please note that the
last tube inserted
should be the
arched one.
7.Connect the body
8.Put the screw bolt
as an oval platform.
through the Velcro
cover
10.Fix it by washer
11.Use wrench to
and nut
tighten it.
13.Top looking and
14.Assembly
appearance
finished, and it is
ready to swing
9. Insert the screw
bolt into the holes of
frame tube. Make
sure the holes are
aligned.
12.Cover the Velcro
back
15. You can stand
up and grasp the
handle and surfing
swing.
05