NetSpa SP-CLEANER-15 Guía De Utilización página 19

GETTING STARTED
1 / Suction head
Insert the suction head into the body (with the notch
turned up) until both parts clip together: both push-
buttons on either side of the body pop out through the
holes on the suction head.
2 / Handle assembly
1. Insert the V-shape clip into the connector as Picture A.
2. Insert the handle into the connect, as in Picture B, until
the side pins are secured into the handle's locking holes.
To release the handle, press both side pins at the same time
and pull out the handle.
3 / Telescopic pole assembly
1. Insert the V-shape clip into the connector as Picture A.
2. Insert the pole's end (with the securing holes) onto the
connector, as in Picture B, until the V-shape clips are
secured into the pole's locking holes.
3. Unscrew the pole's bushings to adjust the length.
4. Screw the pole's bushings to lock in the pole at the desired
length.
To release the pole, press both side pins at the same time and
pull out the handle.
Notch up
Push
button
Hole
EN | 19