Publicidad
Idiomas disponibles
Idiomas disponibles
2 / Cleaning and releasing the impeller
1. Ensure that the cleaner is switched off: remove the battery as indicated in section
"Replacing the batteries", page 23.
2. Remove the suction head from the cleaner, as in Picture A.
3. Remove the hand protection part (see "a" in Picture B): turn the grid clockwise, then
remove.
4. Remove the dirt from the impeller (see "b" in Picture C).
B
5. Put the hand protection part back on: turn the grid anti-clockwise to tighten it, as in
Picture D.
6. Put the suction head back on (with the notch turned up) until it clips in.
22 |
EN
Maintenance
A
b
C
a
B
D
C
Publicidad
