Publicidad
Idiomas disponibles
Idiomas disponibles
4 / Charging
Before charging, check that the cleaner and charger are completely dry.
NOTE: Charge the cleaner for a duration of 3 hours prior to its first use. Once
completely charged, the device's autonomy reaches about 45 to 60 minutes.
1. Plug the charger into an electric plug: the green led lights on.
2. Insert the charger's connector into the cleaner: the red led lights on.
NOTE: When the battery is completely flat, it is normal that the charging led flashes
for 20 to 50 seconds. Then , the indicator turns red and the battery will charge as
usual.
3. Complete charge time lasts from 2.5 to 3 hours. The led turns green once fully
charged.
4. Disconnect the device from the charger, then remove the charger from the electric
plug.
5. The cleaner is ready to be used.
Only use the charger with NI-MH rechargeable batteries.
Do not use the charger with any other type of batteries.
20 |
EN
Getting started
Publicidad
