NetSpa SP-CLEANER-15 Guía De Utilización página 21

Before proceeding with the cleaner's maintenance, ensure that it
is not connected to the electricity.
As a precaution, we recommend that you remove the battery
compartment to avoid any electrical risk.
1 / Cleaning the cleaner after use
If there is dirt contained in the head
part:
1. Press both side clips of the body.
2. Remove the suction head from the
body.
3. Clean the suction head.
4. Put the suction head back on (with
the notch turned up) until it clips in.
If there is dirt contained in the filter bag:
1. Hold the body with one hand and turn
clockwise to remove the filter bag.
2. Clean the filter bag.
Tip: use a jet of water on the reverse
side of the net to remove any impurities.
3. Put the filter bag back on: turn it anti-
clockwise.
MAINTENANCE
Notch up
Hole
Push button
EN | 21