Volume Curve Setting; Output Setting - Esoteric C-02X Manual Del Usuario

Additional settings (continued)

Volume curve setting

(VolMode>***)
With this unit, the volume level can be adjusted by dB or with a "vol-
ume curve" of 100 steps numbered 0 to 99 between −∞ to 0 dB.
When dB is selected, the volume can be adjusted from −99.5 dB to 0
dB in 0.5dB steps.
You can select from the 5 different volume curves (A, B, C, D and E)
shown below.
The default value is "dB".
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
- ∞
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 99
o When you change the volume curve setting, the volume will be
minimized.
o When dB is selected the volume is shown in dB. When a volume
curve is selected (A–E), steps 0–99 are shown.
18
A
B
C
D
E
Steps

Output setting

(Out>***)
You can set which connectors output audio.
The default setting is "BOTH".
XLR
Sound is output from the XLR 1/XLR 2 connectors.
RCA
Sound is output from the RCA 1/RCA 2 connectors.
BOTH
Sound is output from both the XLR 1/XLR 2 connectors and RCA
1/RCA 2 connectors.
o The setting is shown by the output indicator.
When BOTH is selected, the XLR and RCA indicators will both light.