Descargar Imprimir esta página

Aiwa CSD-ES777 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
Specifications
Tuner section
:
Frequency range, antenna — FM: 87.5 - 108.0 MHz Rod antenna,
MW: 530 - 1,605 kHz Ferrite bar antenna, LW: 150 - 285 kHz Ferrite bar
antenna
Deck section
Track format — 4 tracks, 2 channels / Frequency range — Normal tape:
50 - 12,500 Hz (ElAU) / Recording system — AC bias / Erasing system —
Magnet erase / Heads — Recording/playback head (1), Erasure head (1)
CD player section
Disc — Compact disc / Scanning method — Non-contact optical scanner
(semiconductor laser)
General
Speaker — 100 mm cone type (2), 36 mm cone type (2) / Output —
Headphones jack (stereo mini-jack) / Power output ~5.0W+5.0W
,
(DIN MUSIC POWER) 4.5 W + 4.5 W (EIAd 3.2 ohms DC), 3.3 W + 3.3
W (DIN 1% Rated Power) / Power requirements — DC 12 V using eight
size C (R14) batteries, AC 230 V, 50 Hz / Power consumption — 27 W
Dimensions (W x H x D) — 500 x 196 x 290 mm
Weight (excluding batteries) — 4.6 kg
+ Specifications and external appearance are subject to change without
NOTE
ae
.
notice.
While CD function is selected, operate the following
+ Specifications, trade mark, model name and the double square symbol
procedures in stop mode.
fp] are marked on the bottom of the unit.
7 Press REPEAT/OSC while pressing STOP/
COPYRIGHT
;
;
;
MEMORY.
Please check the copyright laws relating to recordings from disc,
:
radio or external tape for the country in which the machine is being
used.
The dot and number flash.
If STOP/MEMORY is kept pressed, another operation
may start.
Each time it is pressed, the time changes between 10
and 90 minutes in 10-minute steps.
Example: The unit will turn off
after 30 minutes.
Maintenance
To clean the cabinet
Use a soft cloth lightly moistened with mild detergent
solution. Do not use strong solvents such as alcohol,
benzine or thinner.
GL
To clean the heads
When the tape heads are dirty;
While the sleep timer works
- high frequency sound is not emitted
the dot keeps flashing.
- the sound is not adequately high
- the sound is off-balance
- the tape cannot be erased
- the tape cannot be recorded on
After every 10 hours of use, clean the tape heads with a
The volume level! or
a CD track number
head cleaning cassette.
Use separately sold dry-type or wet-type cleaning
ENGLISH 7

Publicidad

loading

Este manual también es adecuado para:

Csd-es577