Publicidad
Idiomas disponibles
Idiomas disponibles
brightness options 1 to 6 and ENTER to select.
TIP: depending on the lighting, surrounding décor colours and airflow in the room, making adjustments the flame
intensity, colour and brightness can make a real difference to you look and feel of this fireplace.
SOUND: For authenticity you can add the sound of crackling logs to the flame effect. Select the
to adjust the sound level by pressing
the sound on/off.
Once you have made your adjustments to both the flame height and crackling sound, the appliance will keep these set-
tings even if you power off the appliance by either the on/standby button or by the main switch. The next time you switch
on the appliance, it will start up as normal, wait 45 seconds for the flames to start and then revert to the adjusted settings.
SETTING THE DATE AND TIME
To set the date and time on the heater; with the remote control activated navigate UP/DOWN button to Date & Time icon
1. Press Enter when the
2. Press
and
to set the Hour, press Enter
3. Press
and
to set the Minutes, press Enter to confirm the time
4. Press
and
to set the Day, press Enter
5. Press
and
to set the Month, press Enter
6. Press
and
to set the Year, press Enter to confirm the year
7. Press
and
to select ON/OFF for the Daylight saving time, press Enter to confirm and returns to home screen.
MODES OF OPERATION
MANUAL MODE (HEAT ON CONSTANT)
to the temperature you have set the remote control to. Note: This mode ignores the User Timer and maintains the
displayed temperature.
1. Press Menu Button
2. Press
or
to highlight the
3. Press Enter to Confirm
4. Use
and
to adjust to the desired room temperature. Note the default temperature setting is 21°C and the
maximum temperature set point on the product is 30°C.
5. To turn Heat OFF, Press the Menu
Enter to select.
6. While in Manual mode menu (Temp displayed as below) the user can choose between HI/LO heat output by
pressing the Advance button
or
followed by ENTER to select. On the manual controls the
is blinking
: Select to choose a constant heat mode. This mode heats the room
symbol
or Back
button, then use
followed by
or
or
to highlight the
to highlight and Enter to select.
8
icon on the remote
button turns
symbol and press
Publicidad
