Publicidad
Idiomas disponibles
Idiomas disponibles
English
A. Insert the steel tube from the lower pressure frame in the footrest (8) in the hole of the
height adjustment beam, the length has to be the same on both sides, use the external hex
head bolt (16) to attach the lower pressure frame of the footrest to the height adjustment
beam (6), then insert the polystyrene foam (11) respectively in both sides.
B. Use the nut (17) and the flat washer (19) to lock the upper pressure frame of the footrest
(7) in the bolt of the height adjustment beam (6) from bottom to top, as shown in the
figure, the curved surface of the folded tube should look down.
4. Assembly Guide for the Yatek ECO Inversion Table
Step 4:
•
Publicidad
