YATO YT-82555 Manual Original página 16

EN
risk of dust hazards.
Do not let the experience acquired from frequent use of the tool resulted in careless-
ness and ignoring safety rules. Carefree action can cause serious injuries in a fraction of
a second.
Use and care of the power tool
Do not overload the power tool. Use the power tool appropriate for the selected ap-
plication. The right power tool will provide a better and safer job if used according to the
designed load.
Do not use the power tool, if the electric switch does not allow switching on and off .
Power tool, which cannot be controlled by means of a power switch is dangerous and must
be returned for repair.
Disconnect the plug from the power socket and / or remove the battery if it is de-
tachable from the power tool before adjusting, changing accessories or storing the
tool. Such preventive measures will allow you to avoid accidentally turning on the power
tool.
Keep the tool out of the reach of children, do not let people who do not know how to
operate the power tool or these instructions use a power tool. Power tools are danger-
ous in the hands of untrained users.
Maintain power tools and accessories. Check the tool for mismatches or jams of mov-
ing parts, damage to parts and any other conditions that may aff ect the operation of
the power tool. Damage must be repaired before using the power tool. Many accidents
are caused by incorrectly maintained tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp edges
are less prone to jamming and are easier to control when working.
Use power tools, accessories and inserted tools etc. in accordance with these in-
structions, taking into account the type and conditions of work. The use of tools for
work other than designed is likely to result in a dangerous situation.
Handles and gripping surfaces must be dry, clean and free from oil and grease. Slip-
pery handles and gripping surfaces do not allow for safe operation and control of the tool in
dangerous situations.
Repairs
Repair the power tool only in authorized facilities using only original spare parts. This
ensures proper operation safety of the power tool.
ADDITIONAL SAFETY INSTRUCTIONS
Always observe the safety instructions in the operating manual as well as the other OHS
instructions when using the machine.
Children or persons not trained for the use of spray guns are not allowed to use them.
Never point the device at people or animals.
Do not use spray guns for fl ammable materials.
O R I G I N A L I N S T R U C T I O N S
16