Publicidad
Idiomas disponibles
Idiomas disponibles
Getting started
Warnings and safety instructions
What is in the box
Description of the parts
Controls
Operation
Battery warning
Getting started
•
Take the appliance out of the box.
•
Remove all the packaging from the product.
•
Place the packaging inside the box or dispose of it safely in compliance with the waste
sorting instructions shown on the product packaging.
Warnings and safety instructions
You must read and understand all of the instructions before using this device. The guarantee
will be invalidated in cases of damage caused by failure to follow the instructions.
1. Never remote the housing unit from the device.
2. Never place this device on top of other electrical equipment.
3. Protect the power cable, so as to avoid it being walked over or trapped
4. Only use accessories recommended by the manufacturer.
5.
Repairs must be carried out by qualified repair technicians. Repairs are necessary when
the device has been damaged in any way, and particularly:
- If the power cable is damaged;
- If liquid has been spilled onto the device or if objects have been inserted into it;
- If the device is exposed to rain or humidity;
- If the device isn't working normally;
- If the device has fallen or been struck with something.
6.
The serial number can be found on the underside of the device.
7.
Never obstruct the vent.
8.
Make sure that you leave sufficient space for ventilation. Position the device on a stable
surface.
9.
This device must be used in a moderate climate, away from direct sunlight, flames, and
heat, heating devices, cooking appliances, or any other device (including amps) which
generate heat. Do not install this device close to a heat source.
10. The batteries (battery block or inserted batteries) must not be exposed to excessive heat,
such as sunlight, fire, etc.
11. Always unplug the device before cleaning it. Do not lubricate any part of this device.
somewhere, particularly by the plugs, power sockets, and the device's
power connection. Make sure that the power supply voltage corresponds
to the voltage indicated on the information panel on the rear of the device.
When you disconnect the device, always unplug the device from the power
socket by pulling on the plug itself. Never pull on the cable. Make sure that
you have secured all other connections before plugging in the plug.
12
Product specification
12
Technical specifications of the adapter
14
Care of the environment
15
Additional information
16
Declaration of conformity
16
Guarantee
18
- EN 12 -
19
19
19
19
19
20
Publicidad
