Publicidad
Idiomas disponibles
Idiomas disponibles
5.1.3
Search by article
Selecting the search by article function allows quick access to the in-
formation that refers to a Keyline key article or to other well known
brands.
How to proceed:
• From the MAIN MENU, select:
• Select one of the options in the top drop-down menu (A).
• Input the article code for the Keyline key or other key, then
►
press "
".
• Choose the desired code, or press the "B" button to select
the manufacturer of the blank key (e.g. Keyline) then enter
►
it with "
".
• From the operating menu, choose one of the search or key
modification options: DECODE, CODE, DIRECT and MODIFY.
A
Note: From now on, please refer to chapter 7 on page 15.
Copyright by Keyline - Italy
SETUP
5.2.0
Setup Menu
The main menu allows access to the set-up menu to regulate the cut-
ting and reading devices, to update the machine and use the diagnos-
tic function.
How to access the page:
• From the MAIN MENU, select:
1
2
1 3
5
6
Options displayed:
1. For the calibration of the devices on the machine.
B
2. To access the status check menus of the main devices of
the machine.
3. To access the software and database updating procedure
of the machine.
4. To consult and set the operating parameters of the ma-
chine.
5. To access the following functions:
• Network Status: displays the status of the connection.
• Keys History: to access the database of duplicated keys.
• Cutter change: guided procedure for cutter change.
• Tracer point change: guided procedure for tracer point change.
• Statistics: keeps track of the total number of cut keys
and of other useful counters.
• Format USB drive: to format the USB drive.
• Date and Time: to set current date and time.
• Restart: restarts the program automatically.
• Reboot: restarts the whole system automatically.
• Machine data: displays some useful pieces of information,
such as the machine serial number or the software version.
6. To access the user data management menu described in
paragraph 8.1.0 on page 17.
994 LASER
7.
To access all predefined settings for some viewing pa-
rameters, such as the unit of measure, the preferred ve-
hicle brand, the preset region and numbering system.
• For further information select "
5.3.0
Calibrations Menu
Through the CALIBRATIONS menu it is possible to access the calibra-
tion functions of the machine's devices, in order to obtain the correct
execution of the duplication process.
4
How to access the page:
• From the SETUP MENU, select:
7
1
Options displayed:
1. Used to calibrate the cutter manually and to adjust its
position in respect to the X and Y axes.
2. To select the jaw to be installed and to calibrate it accord-
ing to the type of key to be cut.
3. To regulate the Touch Screen settings.
4. To access the menu that allows the operator to reset the
tracer point and jaws.
• For further information select "
Man. cod. B409619FG
" from the display .
2
3
4
" from the display .
Keyline S.p.A.
9
Publicidad
