AENO DI2 Manual De Instrucciones página 17

Maintenance
 Daily care. Open the cap of the water removal hole (9) and drain the
remaining water from the tank. Detach the nozzle using button (7) as shown
in figure e. Rinse the tank and nozzles in warm running water without
cleaning agents and dry them thoroughly.
 Total care. A total cleaning of the water tank must be performed once a
week. To do this, disconnect the tank as shown in picture f. Rinse its inside
and outside in warm running water using a soft brush or sponge, without
cleaning agents, and dry it thoroughly.
Troubleshooting
 The device does not turn on. Possible reason: the battery is low. Solution:
сharge the device for at least 3 hours.
 The device does not eject water. Possible causes: the nozzle outlet is clogged;
there is no water left in the tank. Solution: clean the nozzle outlet; fill the tank
with water.
WARNING! If none of the suggested solutions has helped you solve the
problem, contact the supplier or service centre. Do not disassemble the device
or attempt to repair it yourself.
ASBISc reserves the right to modify the device and to make changes and additions to this
document without prior notice to users.
The warranty period and service life is 2 years from the date of retail sale of the product.
Manufacturer's information: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol,
Cyprus. Made in China. All trademarks and names herein are the property of their respective
owners. Up-to-date information and a detailed description of the device, as well as connection
instructions, certificates, information about companies that accept quality claims and warranties,
are available for download at aeno.com/documents.
aeno.com/documents 17