Silvercrest SLE 200 B2 Guía Breve página 18

DEHUMIDIFICATION
This programme offers you the option of setting the desired air humidity level that
should be achieved yourself.
♦ Press the
humidity in 5% steps between 30% and 80%. The set value flashes on the
display p for approx. 5 seconds and then the current relative humidity
value is shown again.
Additionally, you also have the option to select the setting
make a setting below 30% relative humidity. This setting allows you to achieve
a very low humidity as the dehumidification runs permanently.
NOTE
► The minimum humidity that can be achieved in
many factors, such as the room size or the ambient temperature, etc.
Therefore, it is not possible to define a generally applicable minimum value.
DRY LAUNDRY
You can use this programme to dry damp laundry or textiles faster. Turn the
appliance so that the air flow from the air outlet 8 is directed towards the
garments you want to dry. Changes in the desired humidity are not possible in
this programme.
Timer function
The appliance is equipped with a timer function that can be activated for both
programmes. One of 24 switch-off times, ranging from 1 to 24 hours, can be
selected. Once the set time has elapsed, the appliance switches off permanently.
♦ While the appliance is running, press the
button z at the same time. The
on the display p.
♦ Press the
from 1 to 24 hours. The selected switch-off time flashes on the display p for
approx. 5 seconds and then the current relative humidity value is displayed
again.
♦ To stop the timer prematurely, press the
button z at the same time again. Then press the
DOWN button z to set the timer to
TIMER LED i goes out and the display p shows the current relative
humidity value.
SLE 200 B2
UP button a or the
UP button a or the
DOWN button z to set the desired
mode is dependent on
UP button a and the
TIMER LED i lights up, and
DOWN button z to set a switch-off time
UP button a and the
UP button a or the
. After around 5 seconds, the
if you want to
DOWN
flashes
DOWN
GB │ IE │ 15 ■