These include:
-
Staff kitchens in shops, offices and other work environments
-
Farms, hotels, motels and other residential establishments
-
Guest houses that offer breakfast (Bed & Breakfasts)
-
Catering and similar non-retail applications.
•
The refrigerator performs best at an ambient temperature of 16-32 degrees.
We recommend turning off the cooler when the ambient temperature is less
than 10°C.
•
After plugging in the mains cord, allow the device to cool down for 2-3 hours
before placing a drink in the cooling compartment.
•
Ventilation is very important for this type of thermoelectric refrigerator.
The inner circuit board can be easily damaged if ventilation is poor. Poor
ventilation will also reduce the life of the refrigerator.
•
These models feature a thermoelectric refrigeration system with automatic
defrost, eliminating the need for manual defrosting.
•
The refrigerator must be plugged into a properly grounded electrical outlet
that conforms to local codes before operation.
•
Check the data plate located on the side of the refrigerator to ensure that the
voltage and frequency correspond to local values; if not, do not plug the cord
into the outlet.
Placement
When installing a thermoelectric refrigerator, you must consider ventilation,
namely the following points:
•
At least 200 cm
should be left for ventilation.
3
•
The distance between the wall and the cooler side should be at least 20 mm.
•
At least 50 mm should remain free for the air flow on the back.
•
The air flowing through must not be preheated.
•
The entire cooling system must be considered for ventilation.
EN
23