Braun 6 Serie Manual Del Usuario página 19

This appliance is designed for household use
only.
Important
Keep power supply, charging stand, and cleaning
station dry.
Do not use if the appliance or any attachment is
damaged.
Do not open the appliance!
The built-in rechargeable batteries can only be
replaced by an authorized Braun Service center.
Only at the end of the product's useful life,
disassemble the rechargeable battery for disposal
reasons:
Disassemble the housing as shown in the battery
removal pictures, remove the rechargeable battery
and recycle or dispose of properly, according to
local guidelines.
Caution: Disassembling the appliance will destroy it.
Recommended ambient temperature for charging is
41 °F to 95 °F / 5 °C to 35 °C, for storage and shaving
it is 60 °F to 95 °F / 15 °C to 35 °C.
Do not expose the appliance to temperatures higher
than 122 °F / 50 °C for extended periods of time.
The brush (03-BR) must not be used on damaged
or irritated skin or on wounds.
If skin irritation occurs, discontinue use.
Avoid direct contact with eyes and hairline.
The body trimmer (06-BDT) must only be used with
comb attachment in delicate areas.
Only use the appliance for its intended purpose.
For hygienic reasons, do not share this appliance
with other persons.
How to shave
Position the shaver head at 90° angle to your skin so
that all shaving elements have full skin contact.
Shave against the direction of your beard growth in
straight back and forth movements.
How to clean
The foil & cutter cassette needs cleaning under hot
running water after each foam or gel usage.
Switch the shaver on and rinse until all residues have
been removed.
20
With regular wet cleaning, apply a drop of light
machine oil (not included) onto the Foil & Cutter
cassette / trimmer head once a week.
The brush (03-BR) needs to be cleaned under cool
running water after each usage!
Subject to change without notice.
Product contains recyclable electric
waste. For environment protection, do
not dispose of in household waste, but
for recycling take to electric waste
collection points provided in your country.
Description
1 Foil & cutter cassette 64B
2 On/off button
3 Mode button
> Shave mode (Shaver on)
To choose the preferred shave mode:
- Standard mode
- Turbo mode
The last selected shave mode is saved.
4 Display
- Turbo mode
- Foil replacement indicator
- Travel lock indicator
- Cleaning station indicator
- Low charge / cordless use indicator
- Battery indicator
- Status bar
5 Power socket
6 Power supply
7 Pouch
8 Protective cap
9 Precision trimmer 02-PT
10 Beard trimmer 05-BT with combs
(1/2/3/5/7 mm, 0.04/0.08/0.12/0.2/0.28 in)
11 Body trimmer 06-BDT with combs
(1 mm = sensitive / 3mm, 0.12 in)
12 3-day beard trimmer 08-3DBT for an
even 3-day beard look with 4 x 2 combs
(0.5 - 2.3 mm, 0.02 - 0.09 in)
13 Facial cleansing brush 03-BR
with protective cap
14 Charging stand
15 Cleaning station
(description in separate UI)