Publicidad
Idiomas disponibles
Idiomas disponibles
5
Align the handle arrow
to the unlock position,
fully insert into the
housing, push down,
and rotate clockwise
to the lock position.
IMPORTANT: The system
will not work unless
the FreshWater IQ
handle is fully rotated
to the locked position.
IMPORTANT ADDITIONAL INFORMATION
6
WARNING: The spa user is ultimately responsible for maintaining safe and sanitary water in the spa regardless of what water
Replace the FreshWater IQ cap
quality system is installed on the spa.
and turn clockwise to tighten.
Turn the power to your spa
WARNING: Please make sure the FreshWater
back on (reference Spa Owner's
WARNING: Operating FreshWater IQ in the unlocked position can damage the sensor cartridge.
Manual for instructions). Your
FreshWater IQ smart monitoring
WARNING: To reduce the risk of injury, do not permit children to operate this device.
system is now installed.
WARNING: Maintaining high salt and chlorine levels above recommended range can contribute to corrosion of spa equipment.
IMPORTANT: FreshWater IQ will not function accurately when the spa water is below 60° F (15° C).
NOTE: Some FreshWater IQ
readings may be impacted until
IMPORTANT: When using test strips, check the expiration date of test strips as test results may be inaccurate if used after
the FreshWater Salt System has
that date.
been installed and is operational.
IMPORTANT: Use genuine FreshWater parts when replacing the FreshWater IQ sensor.
IMPORTANT: FreshWater IQ is not compatible with Monopersulfate (MPS), Ozone, Bromine, FreshWater Mineral Spa Sanitizer, or
other silver nitrate products.
®
Salt System is operational before using/starting FreshWater IQ.
Publicidad
