Anker SOLIX E1600 Manual De Instrucciones página 11

Step 4
Step 5
Step 6
Firmware Update
Make sure your device has configured the Wi-Fi network and is currently online, and the micro inverter is
connecting to the Solarbank.
Step 1
Step 2
09 EN
The app will automatically search for your Solarbank. Once
the device is found, it will appear on the list.
• Please make sure your mobile Bluetooth is on, and the
app is authorized to access Bluetooth and Wi-Fi.
• If you wish to manually search for the device, you could
tap [Balcony Solar System] in the "Add devices manually"
row.
After connecting Solarbank via Bluetooth, you need to
choose a network for the device. Select a network from the
list and enter the password.
• The device only supports 2.4Ghz Wi-Fi.
• Make sure the password is correct.
Your solarbank has successfully configured the network.
If the configuration process fails, you can troubleshoot
below:
• Is the network working normally?
• Is the device close to the router?
• Is your Wi-Fi password entered correctly?
1. Select the brand of the micro inverter which is connecting
to the Solarbank
• If you have not found a brand, pick "Others"
2. Select the model of the micro inverter
*If there is an important update for the firmware of
Solarbank or micro inverter, the app will guide you to go to
the "Firmware Updates" process. Make sure your devices are
on and connected to Wi-Fi.
If there is no update requirement, skip this step.
*The updates might last for a few minutes. Please be patient.
If the updates fail, check if the devices are turned on or
online.