Anker SOLIX E1600 Manual De Instrucciones página 12

Control Mode
When solar energy is produced, the power will flow to your home load usage, Solarbank storage, and the grid.
You may set family load power rates to limit solar energy output during a specified time, so that energy could
be e ectively used by your family instead of being consumed by the grid. The extra energy will be stored in
your Solarbank.
Family Load Power Rate
When solar energy is produced, the power will flow to your home load usage, Solarbank storage, and the grid.
You may set family load power rates to limit solar energy output during a specified time, so that energy could
be e ectively used by your family instead of being consumed by the grid. The extra energy will be stored in
your Solarbank.
Overall
Add Time
Period
Change
Power
Rate
In the final step, you can select Wi-Fi Control Mode or Bluetooth Control Mode.
1. WiFi Control Mode: Your Solarbank will connect to Anker server, and we will
provide more cloud services to you, including:
• Creating a home system.
• Remotely setting an energy plan.
• Remotely viewing the energy flow of the home.
• Collecting energy data and displaying trends from historical data.
2. Bluetooth Control Mode: Your Solarbank will not connect to Anker server and
will be able to work in o ine circumstances. Note that you CANNOT:
• Create a home system.
• Review Solarbank's real-time data anytime. Only when you're connected to it.
• Set an energy plan anytime. Only when you're connected to Solarbank.
• Have a backup save of power data in the cloud.
1. Explaining the Daily Energy Usage Screen:
• Blue line: The home load power rate. Modify it in the
• The curve: Solar energy produced the day before.
• Green area: Estimated solar storage in Solarbank.
• Blue area: Estimated solar energy consumption,
2. Time frame: You can schedule how much power is used
during each time period.
3. Family load power limit: Set a limit on solar energy
consumed by your home and the grid. You can customize
the rate for each time period. After modifying, the plan
[Picture 1] will change to reflect your changes .
1. You can tap [Set a schedule] below to add a time period.
2. You can edit the power rate by tapping the schedule
setting below.
Note that weather changes may a ect solar energy
production. This curve is for reference only.
including the home load and grid.
Each clip has a default rate of 200W.
section [set power] in each time period.
EN 10