1.
STOP/CLEAR BUTTON
While setting a cooking procedure, you can press the "STOP/CLEAR" button to
cancel the settings and resume to standby mode. During cooking, you can
press the "STOP/CLEAR" button to make a pause. In pause mode, you can
press the "STOP/CLEAR" button again to cancel the function and resume to
standby mode.
2. START/+30SEC BUTTON
After setting the cooking time and microwave power, press the START/
30SEC button to start the cooking program. During the cooking process, you
can press the START/+30SEC button to increase the cooking time for 30
seconds. Each time you press this button, it will increase by 30 seconds, but
you cannot increase the cooking time in the Auto Cook mode or Weight Defrost
mode.
If cooking is paused, press the START/+30SEC button to resume.
3. SETTING THE CLOCK
1) After the unit is powered up the first time, it will enter standby mode with the
display shows 1:00 (12-hr format only).
2) To readjust the clock time (in standby mode only), press the Clock button,
the clock time will display as "00:00". Hours digits will blink with Minutes
digits solid;
3) Press the Number button 0-9 to input the Hours. And the Minutes digits will
blink to prompt for input. Press the Number button to input the Minutes;
4) Press the Clock or START/+30SEC button to confirm the time. After
completed, the ":" will blink and the clock time becomes solid.
4. KITCHEN TIMER
Kitchen Timer is a countdown function, please follow the steps below:
(1) In standby mode, press the Kitchen Timer button, the countdown icon and
timer "0:00" will display at the same time;
(2) Press the Number button 0~9 to input the time. The maximum time that can
be input is 99:99;
(3) After setting countdown timer, press the START/+30SEC button to start
countdown. It will beep when completed. And, the timer can be cancelled by
pressing the STOP/CLEAR button during countdown process.
EN
OPERATION
12