Husqvarna Z448 Manual De Usuario página 15

2. Make a small turn (A) in the direction of the uncut
area of grass.
C
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
Maintenance schedule
* = The instructions are not given in this operator's
manual.
Maintenance
Do a check of the parking
brake.
Do a check of the level of
the engine oil.
Do a check of the safety
system.
Make sure that there are
no fuel or oil leaks from
the product.
Make sure that there are
no damage on the prod-
uct.
Make sure that there are
no loose parts.
2237 - 001 - 11.08.2023
B
A
Maintenance
Before you do any
Daily maintenance
Before After
X
O
X
*
*
*
3. Pull the 2 control levers to the reverse position
and move the product rearward (B).
4. Push the control levers forward. To make a small
turn (C), pull harder on the control lever that is in
the direction of the row you have cut before.
5. Push the 2 control levers forward to cut the next
row.
X = The instructions are given in this operator's
manual.
O = Refer to the engine manual for instructions.
Maintenance schedule for the operator
Do mainte- Maintenance interval in hours
nance at a
minimum of
25
1 time each
year
*
50 100 300
*
15