Beper P101CAF001 Manual De Instrucciones página 10

Automatic Milk Frother Use Instructions
When the appliance must be disposed of, it is recommended to make
it inoperative.
It is also recommended to render harmless those
parts of the appliance likely to constitute a danger.
This appliance must not be used by children.
Children must not play with the appliance. Keep the
appliance and its cable away from children under 8
years of age.
This appliance can be used by children of 8 years or older and by
persons with limited physical, sensory or mental capabilities, or by
persons that lack experience and knowledge of the appliance, provi-
ded they have been given complete instructions concerning the safe
use of the appliance and provided that they understand the related
risks.
Product Descriptions Fig. A
1. Lid
2. Container
3. Function button
4. ON/OFF button
5. Base with power cord
6. Frothing whisk
Control Panel Descriptions Fig. B
1. Hot and dense foam
2. Hot and light foam
3. Heating only without frothing
4. Cold frothing
Capacity indication – Fig. C
Quantity of milk to heat or froth: Adhere to the minimum and maximum quantities as shown in Fig. C:
MAX: Maximum capacity for heating (300 ml)
MAX: Maximum capacity for frothing (150 ml)
MIN: Minimum capacity for heating or frothing
Before First Use
Before using the Automatic Milk Frother, clean all parts as indicated in the "Cleaning and Maintenance" section.
Operation
Hot and Dense Foam
Place the appliance on a flat surface.
Open the lid, insert the frothing whisk above the pin situated at the bottom of the container.
Fill the container with the desired amount of milk and put on the lid.
Note: The maximum amount of milk to add is 150 ml (Fig. C) to avoid milk spills after frothing. The mini-
mum amount of milk to add is 75 ml.
10