IKRA IBF 31-4 Instrucciones De Manejo página 37

FAILURE REMOVAL
Failures
Engine does not start or
starts, but does not run
further.
Engine starts, but does
not run at full power.
Engine splutters.
The motor does not de-
velop maximum power
Engine does not run
smoothly.
Excessive exhaust gases
(smoke).
DISPOSAL
If your device should become useless somewhere in the future or you do not need it any longer, do not dispose of the
device together with your domestic refuse, but dispose of it in an environmentally friendly manner. Thoroughly empty
the oil/lubricant and fuel tanks and dispose of the remainders at a special collecting point or dump. Please dispose of
the device itself at an according collecting/recycling point. By doing so, plastic and metal parts can be separated and
recycled. Information concerning the disposal of materials and devices are available from your local administration.
Never dispose of oils, fuel or other polluting materials in unauthorised places.
Make sure the oil products do not enter the soil.
Oil products must not come into contact with skin, eyes and clothing.
Causes
Wrong starting process.
Empty fuel tank/Lack of fuel
Wrong fuel, storing without petrol tank
being drained
Wrong setting of the carburettor.
Sooted spark plug (carbon residues on elec-
trodes), electrodes distance too big
The spark plug is wet from petrol (oversatu-
rated engine).
Dirty air filter
Dirty air filter
Wrong setting of the carburettor.
Dirty air filter
Wrong setting of the carburettor.
Removal
Refer to the instructions in these operating
instructions.
Add some fuel
Drain the fuel tank and carburettor. Add
fresh petrol.
Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Clean the spark plug, check the plug thermal
value, possibly change the plug.
Dry the spark plug out and refit it.
Clean or replace the air filter
Clean or replace the air filter
Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Clean or replace the air filter
Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
EN ENGLISH
35