Adsl Settings; Upnp Settings; Ddns Service Settings - Velleman CAMIP7N Manual Del Usuario

click on an on-screen button to activate the WPS feature. If you
are not sure where the WPS button is on your router, prease
refer to your Router‟s manual.
Notes
The camera will automatically create a secure wireless connection
to your router. If you have plugged in the network cable, please
plug it out. While connecting, the green network light on RJ45 will
blink and the wireless settings will take effect. The IP Camera Tool
will search the camera‟s LAN IP. Make sure the PC and the camera
share the same subnet.
During the WPS settings, you must press the RESET button only
for four seconds. When you press and hold down the RESET
button for 10 seconds the camera will be reset back to factory
default settings.
The security mode of router cannot be WEP, or else the WPS
settings may be failed.
11.9

ADSL Settings

When connected to the Internet directly via ADSL, check the
checkbox and enter the ADSL User name and ADSL password you
obtained from your Internet Service Provider (ISP).

11.10 UPnP Settings

Select the checkbox to use the Universal Plug and Play (UPnP)
protocol.

11.11 DDNS Service Settings

Free DDNS Service
The Dynamic DNS name will be something like:
a00000.myipcamera.org
Now you can use http:// Domain name + HTTP Port to access the
camera via internet.
V. 04 – 23/09/2013
CAMIP7N
18 ©Velleman nv