Alarm Service Settings - Velleman CAMIP7N Manual Del Usuario

11.14 FTP Service Settings
These settings will only take effect if the option Upload Image on
Alarm is selected in the Alarm Service Settings (see below).

11.15 Alarm Service Settings

Select the checkbox Motion Detect Armed to enable motion
detection.
This also allows mails to be sent out (see Mail Service Settings)
and image upload to an FTP server (see FTP Service Settings).
Note: when the camera is in auto tilt or auto pan mode, motion
detection and external alarm input are disabled.
The motion detect sensibility can be set between 1 and 10, with
10 being most sensitive.
Select the checkbox Send Mail on alarm to send a mail when an
alarm is detected.
Make sure to fill out all fields on the Mail Service Settings page
(see above).
Select the checkbox Upload Image on alarm to upload images to
an FTP server when an alarm is detected.
Make sure to fill out all fields on the FTP Service Settings page
V. 04 – 23/09/2013
CAMIP7N
22 ©Velleman nv