Faq; Troubleshooting; Warranty Conditions - Ambiano KLFP3B Manual Del Usuario

FAQ

Troubleshooting

Problem
Will not
operate or turn
on
Stops during
operation
Works slowly
Food is
unevenly
chopped
Slices are
uneven or
slanted
Possible Causes
- No power
- Bowl and lid are not
properly aligned
- Overheated power base
- Damages due to ship-
ping damage or improper
installation
- Overloaded
- Bowl or lid is unlocked
- Overheated power base
- Overloaded
- Pieces of food are too
large
- Overloaded
- Improper packing of feed
tube
Solutions
- Check if food processor is plugged in.
- The food processor will not start if
the bowl and the lid are not properly
aligned and locked into the power
base.
- Turn the unit off and wait for the
motor to cool down before proceeding.
DO NOT operate the food processor
continuously for more than one
minute.
- See "Warranty Conditions" on p. 56
of this user manual.
* If none of the above work, check
the fuse/circuit breaker in your home;
or the motor may have burned out.
- Remove some food and restart
operation.
- Check to see if the lid is aligned and
locked.
- Turn the unit off and wait for the
motor to cool down before proceeding.
DO NOT operate the food processor
continuously for more than one
minute.
* If none of the above work, check
the fuse/circuit breaker in your home;
or the motor may have burned out.
- Remove some food and restart
operation.
- Cut food into smaller pieces and
restart operation.
- Try to process less food at a time.
Pulse or chop until the pieces of food
are no larger than 1/2 inch.
- Pack the feed tube carefully and
maintain an even pressure on the
food pusher.
FAQ
25