Safety
22. ALWAYS switch the appliance off by turning the control knob to the OFF position;
wait until the knife blade or plate carrier comes to a complete stop before
disassembling.
23. To disconnect the appliance from the electrical outlet, verify that the speed control
knob is turned to the OFF position, and then pull directly on the plug. DO NOT pull
on the power cord.
24. ALWAYS unplug the unit from the electrical outlet when not in use.
25. DO NOT plug or unplug the appliance with a wet hand.
26. DO NOT put any stress on the power cord where it connects to the appliance, as
the power cord could fray and break.
27. ALWAYS ensure the appliance is unplugged from the electrical outlet, and that all
parts have stopped before assembling, disassembling, relocating or cleaning the
unit.
28. DO NOT expose or immerse the base, power cord or plug of this appliance in
water or any other liquid.
29. DO NOT operate the appliance if it has a damaged or cut power cord or plug, if the
wires are exposed, if the unit malfunctions, if the unit has been dropped or damaged,
or if the base has been dropped in or exposed to water.
30. DO NOT store any materials other than the manufacturer's recommended
accessories in the food processor when it is not in use.
31. This appliance has no user serviceable parts. DO NOT attempt to examine or repair
this appliance yourself. Only qualified service personnel should perform any servicing.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Safety Warnings
Although the appliance is easy to operate, the warnings below must be followed for
your safety:
•
DO NOT immerse the cord, plug, or any portion of the power base in water or any
other liquid.
•
DO NOT use the appliance on an unstable surface.
•
DO NOT place the appliance near a heat source.
•
DO NOT unplug the appliance by pulling on the power supply cord.
•
The appliance must be unplugged and cooled down completely before any cleaning
or maintenance duties.
8