Ambiano KLFP3B Manual Del Usuario página 26

FAQ
Food items fall
over inside the
feed tube
Liquid leaks out
between the
bowl and lid
during
operation
Cheese spreads
out and collects
on top of the
plate carrier
Poor
performance
of tools
Knife blade or
plate carrier
continues to
spin even
after the unit is
turned off
26
- Improper packing of feed
tube
- Overloaded
- Heavy pressure used on
the food pusher
- Temperature of the
cheese
- Blade worn down
- Malfunctioning power
base
- Cut food into equally sized pieces
and use enough pieces to fit the feed
tube snugly.
- NEvER use more than 1.5 cups
(360ml) of a very thin liquid. The
thicker the liquid, the more you can
use. With thick mixtures like pancake
or cake batter, you can process as
much as 2 cups (480ml).
- ALWAYS use light pressure when
processing cheese.
- Cheese should be processed based
on its consistency. Shred hard cheese
(e.g., parmesan) at room temperature,
while freezing softer cheeses (e.g.,
mozzarella) for approximately 10 to
15 minutes before shredding.
- See "Warranty Conditions" on p. 56
of this user manual.
- If either attachment continues to
spin well after the food processor is
turned off, unplug the unit from the
electrical outlet. Once the attachment
has stopped spinning, remove the
lid and empty the bowl contents.
DO NOT use the food processor any
further; see "Warranty Conditions"
on p. 56 of this user manual.