Taking Pictures Using A Digital Camera Without Communication Functions; How To Select The Flash Mode - Panasonic Lumix DMW-FL500 Instrucciones De Funcionamiento

Taking Pictures using a
Digital Camera without
Communication
Functions

How to select the flash mode

≥ For details on each flash mode, turn to P21 to
23 .
1 Push the [POWER] button on the
unit.
≥ The [TEST/CHARGE] button lights after
the batteries have been fully charged.
2 Push the [MODE] button to select
the flash mode.
A: Flash mode
≥ The flash mode is shown on the display
panel.
≥ The mode is changed each time the
[MODE] button is pushed.
∫
Concerning the flash modes
Item
[AUTO] The unit senses the light by its
flash sensor in accordance with
the aperture of the lens, and it
adjusts the flash intensity. (P21)
[MANUAL] The unit fires at the guide number
¢
(GN)
¢ The guide number (GN) is a value which
indicates the light quantity of a flash unit. The
higher the value, the greater the quantity of
light emitted by the unit.
20
VQT0Z62
MODE
A
Details of settings
which has been set. (P23)