Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
Options
Using washer options
1. Tap WASHER, and then tap Options.
2. Turn the Navigation dial to select the desired option.
3. Tap OK to change the settings for selected option.
NOTE
• To return to the main screen, tap Options again or turn the Navigation dial to select Back and tap OK.
• If the selected function is not supported, the "Currently not supported" message is displayed, and the
OK button is not activated.
• When you select an option, a brief help message appears for the first ten times of use.
Extra Rinse
Adds an additional rinse at the end of the cycle to remove laundry additives more thoroughly.
1. Tap WASHER, and then tap Options.
2. Turn the Navigation dial to select Extra Rinse, and then tap OK.
3. Tap OK to select On or Off.
Pre Soak
This adds 30 minutes of soaking time at the start of the wash cycle for better stain removal.
1. Tap WASHER, and then tap Options.
2. Turn the Navigation dial to select Pre Soak, and then tap OK.
3. Tap OK to select On or Off.
Delay End
You can set the washer to finish your wash automatically at a later time, choosing a delay of between 1 to 24
hours (in 1 hour increments). The hour displayed indicates the time the wash will finish.
1. Tap WASHER.
2. Select a cycle and change the cycle settings as necessary.
3. Tap Options.
4. Turn the Navigation dial to select Delay End, and then tap OK.
5. Turn the Navigation dial to select the desired time, and then tap OK.
6. Touch and hold
.
-
Status shows on the display and the washer tumbles the drum to sense the weight of the load (if
load sensing is preset for the selected cycle). When load sensing is complete, the display shows the
remaining time until the end of the wash cycle.
-
To cancel Delay End, tap
64
English
Untitled-1 64
to restart the washer.
2023-11-09( )
11:53:43
Publicidad
