S
afety Instructions
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this
appliance, follow basic precautions, including the following:
SAFETY INSTRUCTIONS FOR INSTALLATION
• Do not, under any circumstances, cut or
remove the ground prong from the power cord.
To prevent personal injury or damage to the
dryer, the electrical power cord must be
plugged into a properly grounded outlet.
• For personal safety, this dryer must be properly
grounded. Failure to do so can result in
electrical shock or injury.
• Refer to the installation instructions in this
manual for specific electrical requirements for
your model. Failure to follow these instructions
can create an electrical shock hazard and/or a
fire hazard.
• This dryer must be plugged into a properly
grounded outlet. Electrical shock can result if
the dryer is not properly grounded. Have the
wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly
grounded. Failure to follow these instructions
can create an electrical shock hazard and/or a
fire hazard.
6
• The dryer should always be plugged into its
• Never unplug your dryer by pulling on the
• Repair or replace immediately all power cords
• When installing or moving the dryer, be careful
SAVE THESE INSTRUCTIONS
own individual electrical outlet which has a
voltage rating that matches the rating plate.
This provides the best performance and also
prevents overloading house wiring circuits
which could cause a fire hazard from
overheated wires.
power cord. Always grip plug firmly and pull
straight out from the outlet. The power cord can
be damaged, resulting in a risk of fire and
electrical shock.
that have become frayed or otherwise
damaged. Do not use a cord that shows cracks
or abrasion damage along its length or at either
end. The power cord can melt, creating
electrical shock and/or fire hazard.
not to pinch, crush, or damage the power cord.
This will prevent injury and prevent damage to
the dryer from fire and electrical shock.
F