Alpina KPT-2402D Manual De Instrucciones página 9

OPERATION
NOTE:
• The operation is explained using the buttons on the appliance.
• The buttons can only be pressed once the appliance has been
switched on by using the
Switching the Appliance On / Off
• Press the
initiates the fan setting and displays the current ambient
temperature. The
fan is operating continuously.
• Press the
NOTE:
A 30 second timer will start in the display. During this period the fan
remains in operation to cool down the appliance. The
lamp lights. When the timer period has lapsed, the appliance will
automatically switch into standby mode.
CAUTION:
When not using the appliance, disconnect the mains plug.
Power Level Selection
Press the MODE button repeatedly to choose between the available
power levels.
Fan operation (without heating)
Power level 1 (1300 Watt)
Power level 2 (2000 Watt)
Use the + and - buttons to select a temperature between 15 and 35°C.
NOTE:
• Once the current ambient temperature has been reached, the
appliance switches off and automatically maintains the set
temperature level.
• There may be a slight difference between the displayed and the
actual room temperature. This is due to the design and does not
mean that the appliance is defective.
Time delayed Switch -off
You can set a time-controlled switch-off for the appliance.
• Use the
• Upon expiry of the timer, the appliance will switch off automatically.
button to switch on the appliance. The appliance
indicator lamp lights. To avoid overheating, the
button again to switch off the appliance.
button to select a time setting between 01 and 12 .
button.
indicator