Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
11.
Tilt wheel: if "wheel to pan/tile" LED flicker, the
TILT wheel controll TILT channel, if "wheel to pan/
tilt" LED OFF, the TILT Wheel controll other pa-
rameter, for example , in "MOVEMENT" mode, TILT
wheel can control TILT move range.
12.
Faders: Channels faders, have 3 page.
13.
PAGE DOWN/CLEAR button: It has 2 func-
tions, press the button, select next page faders,
press and hold 3s, will clear faders change output.
14.
PAGE UP/FADER TIME setup: The button have 2
functions, press the button select previous page
faders. Press and hold the button, then change
"wait timer" fader, will change color channel fade
in and fade out time.
15.
Wait time fader: In chase mode, run chases, change
the fader will change chases setp to setp wait time.
16.
Fade time fader: (Chase Mode) Run chases, change
the fader will change chases setp to setp fade time.
17.
Master fader: Change the fader, will change
R,G,B,W,A,D maximum output ratio.
18.
Hue knob: Control LED light color mixing.
19.
Saturation knob: Control LED light color mixing
Back Side
P. 4
NAVIGATOR SMART RDM
ENGLISH VERSION
saturation.
20.
Brightness knob: Control LED light color mixing
brightness.
21.
REC/ENTER button: The button have 2 functions,
in program mode, is recode command, in menu
mode, is enter command.
22.
Menus/ESC button, press and hold 3s, will activate
menu's mode. In menu mode, press the button,
cancel or ESC setup.
23.
Black out/DEL: In running mode, press the button,
will black-out. In program mode, press and hold
the button, Then press number button(1-12), can
DEL a chase or a scene.
24.
Run mode/swap button: The button have 2 fun-
ctions, in running mode press the button and it can
change chase run mode. In "movement" mode can
swap movement parameter select.
25.
USB host interface: Controller data buckup and
firmware update.
26.
DMX OUT/INPUT
27.
DC input
28.
Power ON/OFF switch.
Publicidad
Tabla de contenido
