Ashdown Engineering THE ELIZABETH Serie Guia Del Usuario página 3

ASHDOWN ENGINEERING - ELIZA
INTRODUCTION
As seen on major stages across the world with some of the biggest and most
famous bands of our time, the status of the Ashdown Bass Amp rig has firmly
secured its place in "Rock 'n' Roll" history. Setting the stage since '97, Ashdown
have been dedicated to providing bassists with the best possible tone, on
stage in the studio and now at home.
The Ashdown story began back 1997, but this certainly wasn't a new ventur for
company founder Mark Gooday. Having previously been managing director
of industry giants Trace Elliot for the 12 years prior to forming Ashdown, Mark
was already somewhat of a bass amp pioneer. You could say that Bass was in
his blood. Mark's natural eye for design and enormous attention to detail in
terms of bass tone has helped to establish Ashdown as the world's leading
amplifiers on the market.
Bass requires far more attention to replicate in sound than that of guitar based
products, covering a far broader spectrum of frequencies, bass has always
been about clarity.
The Ashdown Elizabeth Line encompasses all of what we have learnt about
sound, from working with some of the worlds most admirable musicians and
engineers. The Ashdown Elizabeth Line delivers in style, sound and features.
Featuring our trademark VU meter calibrated to measure the output of the
audio being played through the device. Enjoy high quality audio from the
optional inputs including optical, USB and auxiliary jack. As well as wirelessly
via BT through the impeccable ACS chip set used on board.
USER GUIDE
ASHDOWN ENGINEERING - ELIZA
FRONT PANEL CONTROLS
POWER CORD CONNECTION -
IMPORTANT INFORMATION:
Make sure the power cord, power plug and speaker are compatible with your AC
power source and wall outlet.
1. Plug the power cord into the power input plug on the speaker.
2. Insert the power plug into the wall outlet.
Note. Before disconnecting the power cord from the speaker, always disconnect the
power cord from the wall outlet first.
POWERING ON/OFF -
1. Turn on the power: Press the main power switch on the back panel of the machine
to the ON position.
2. Turn On: Press and hold the power button on the front panel of the speaker
for more than 3 seconds or briefly press the on/off button of the remote until the
indicator light comes on.
3. Turn Off: Press and hold the power button on the front panel for more than 3
seconds or press the remote control swich briefly until the indicator light turns off.
SELECT AUDIO SOURCE -
There are multiple ways (wireless or wired) to connect to the speaker.
- AUX : Stereo plug 3.5mm
- OPTICAL : High-speed optical interface
USER GUIDE