eTIGER S3b Sim Secual Manual De Uso página 10

Control by Phone Call
Method 1
When an alarm has been triggered, the control panel dials the pre-stored phone numbers.
When you take the call, you can control the panel from distance according to the instructions
in the table below.
Method 2
1. Dial the telephone number of the SIM card in your control panel.
2. Enter your password followed by "#".*
3. Select the operations to control the panel (see instructions in the table below).
Note
The call will end automatically if you do not send any command within 30 seconds.
*Default password is 1234.
Table of commands for control by phone call
Command Function
Press "1" Arms the system
- Disarms the system and turns the siren off
Press "0" - Stops monitoring without hanging up
- Ends the phone call without hanging up
Press " " Audio monitoring
Press "3" Phone call with control panel
Press "6" Turns the siren off
Press "9" Turns the siren on
- Disarms the system and turns the siren off
Press "#"
- Exits control by phone call
Comment
-
-
-
-
-
-
Hanging up also exits the
control by phone call.
10