eTIGER S3b Sim Secual Manual De Uso página 9

Arm the System
Press the Arm button " " on the control panel. The control panel beeps once: the system is
armed.
Note
If the Entry / Exit Delay is activated, only the Delay zone will be armed after the delay set (refer
to instructions on page 17 of this manual "Entry / Exit Delay").
Disarm the System
Type your password and press the Disarm button " " on the control panel. The control panel
beeps twice: the system is disarmed.
Home Mode
Press the Stay button " " on the control panel. The control panel beeps twice: the system is
armed in Home Mode.
In Home Mode, all the sensors are armed except those assigned to the Home zone. Sensors
assigned to the Home Mode zone are disarmed: they cannot trigger an alarm.
For more information on zone setup, please refer to the instructions on page 29 of this
manual.
9