Eaton TRIPP LITE U444-06N-HU-C Manual Del Propietário página 4

Installation
Note: When the unit is connected to the USB-C port on your
computer and to a network via Cat5e/6 cabling, a network
connection will be automatically established. If no connection
is made, you can manually establish one by going to your
computer's network settings page. For example, on a Mac
you would navigate to the Network section found in System
Preferences, click the 'Assist Me' button to get to the Network
Setup Assistant, then follow the prompts to establish a
connection.
1. Connect the adapter's USB Type-C connector to
the USB-C port on your laptop, tablet or other
compatible device.
2. Connect the adapter's HDMI port to the monitor's
HDMI port using an HDMI cable (such as
P568-Series HDMI cables).
3. Charge your device by connecting its USB-C
charger to the adapter's USB-C port.
4. Connect a USB device to the adapter's USB-A hub
port.*
5. Connect the adapter's RJ45 port to a network
using a UTP cable (such as N201-Series Cat6
cables).*
*See the USB Type-C Features chart for the features your
product supports.
4