Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
While pressing the dirty water cup release button downward, pull to remove the cup.
Hold the cup and remove the HEPA filter and the lid, and then pull out the separator
in the cup.
Empty the cup, and then place the cup back to the main body. Push the cup in until
it clicks into place.
Self-clean
NOTE:
We recommend that you:
Clean the dirty water cup before and after performing the Self-clean function.
•
•
Clean the charging base right away if any dirty residues remain on the charging
base after using the Self-clean function.
1.
To perform rolling brush self-cleaning, place the Floorwasher back to the charging base
after use.
While the Floorwasher is in the charging base, standing upright, press the Self-clean
2.
button on the handle to start
3.
After performing the self-cleaning, the Floorwasher enters charging mode.
.
11
EN
Publicidad
