Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Clean the rolling brush
Tips:
• If there are residual stains on the suction nozzle, please
wipe it clean with a damp cloth,. Do not rinse with water.
• We recommend that you clean and dry the rolling brush
after each use.
Press the rolling brush release button on the left side.
Pull the rolling brush upward at the left end, and then pull outward to detach the
rolling brush.
Use the hook end of the supplied cleaning brush to remove any tangled hair or debris
from the rolling brush.
Then rinse the rolling brush with tap water.
Wipe clean any stains on the entrance to the suction nozzle with a damp cloth.
Attach the rolling brush back to the Floorwasher.
Troubleshooting
Use this troubleshooting guide to resolve any common problems that you may encounter
withthe product. If the problem persists, do not use the product and contact an authorised
repair centre to have it inspected and if necessary, repaired.
Problem
Battery level icon
flashing
Appliance does not
work
Possible Cause
• Motor abnormal
• Out of power or low
battery
• The rolling brush
is entangled with
objects like hair
14
Solution
• Clean the clog in the tube and restart
the appliance.
• Fully recharge the appliance before
use.
• Clean the rolling brush.
EN
Publicidad
