Emergency Call; Mute Mode; Notices And Maintenance; Usage Notices - Smanos WK8000 Manual De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
EN

Emergency Call

If the SOS function is set to direct SOS, user just holds the
long blank key in the bottom for 3 seconds, the LED indicator
flashes once, keypad beeps once, and the control panel alarms
immediately.
If the SOS function is set to input code for SOS, input user code or
admin code before holding the long blank key in the bottom for
3 seconds to send an alarm.

Mute Mode

Mute mode means to arm or disarm the alarm system mutely.
Input user code or admin code, and hold any key of
for 2 seconds, until the keypad beeps once and sends
corresponding command to the control panel.
When the alarm panel receives the
signal, the LED indicator lights on
or off, but the siren does not beep.
23

Notices and Maintenance

In order to avoid any harm to the users or others during usage
and prolong the usage life, please abide by the following notices.

Usage Notices

General instruction
The keypad should be connected to control panel before use.
The power supply of keypad will probably impact on the transmitting distance of
wireless signal.
The keypad can be powered by 2 pcs of AAA batteries.
The keypad is compatible with any of our alarm system in the same frequency.
Please remove the battery insulating strip before use.
Do not press the SOS button if there's no emergency to avoid disturbing the
neighborhood.
Check the keypad regularly to ensure the system works properly in case of
emergency.
The case of keypad is made of ABS. Please keep it away from strong light to
ensure the lifetime.
Forbiddance
The keypad is non explosion-proof. Please keep it away from fire, flame sources.
Install the keypad away from objects such as heater, air conditioner, microwave
oven etc. that produces heat or electric-magnetic.
Forbiddance of decomposition
Take the keypad for disposal of recycling according to the local regulation.
Do not take apart the product if you are not a professional technician.

Maintenance

You can get most dust or fingerprint off with a dry, soft cloth or
tissue. If there is dirt on the keypad, please wipe the surface by
a soft cloth with a little dilute alkaline detergent and then wipe
again with a dry cloth.
EN
24

Publicidad

Tabla de contenido
loading

Tabla de contenido