Publicidad
Idiomas disponibles
Idiomas disponibles
**
F 1: dispensing begins by pressing switch button
F 2: dispensing occurs by holding switch button
released.
5.
7
GRINDER WEAR
5.
1
5.
5
The grinder wear value can be changed by inserting the desired value using the numeric
keypad (5.1) and confirming with the confirmation button (5.6). The values shown
in points 5.3 (number of remaining doses) and 5.4 (number of excess doses) are
automatically updated after each dispensed coffee.
Each time the grinders are changed, reset the counters by pressing the "Reset
counters" button (5.5) and confirm using the confirmation button (5.6).
CHANGE PASSWORD
6.
4
Technical Pass.
6.
1
Doses Pass.
6.
2
Counters Pass.
The password to access the "Technical", "Settings/Doses" and "Counters" pages can
be set by clicking on the relative buttons (6.1, 6.2 and 6.3).
Grinder replacement
counter
3
Reset
counters
Set
Set
Set
9
and continues for the pre-set time.
9
pressed, and ends when it is
5 GRINDER WEAR
Numeric keypad
5.
8
5.1
Grinder wear value
5.2
5.
2
Number of remaining doses
5.3
5.4
Number of excess doses
5.
3
5.5
"Reset counters" button
5.
4
5.6
Confirmation button
5.7
Technical 1/2: return (para.4)
5.
6
Menu: access (para.3)
5.8
6 CHANGE PASSWORD
Technical password
6.1
6.
5
6.2
Doses password
6.
3
6.3
Counters password
6.4
Home: return (para.1)
6.5
Menu: access (para.3)
SOFTWARE INTERFACE
45
Publicidad
