JANE CONCORD iXPERT Manual De Instrucciones página 15

_ FEATURES OF YOUR iXPERT SAFETY SEAT
The iXPERT safety seat has been designed using the latest advances in safety and comfort:
• iXPERT should be installed with ISOFIX. It is fitted with a support leg as an anti-rotation
system.
• The height of the shoulder straps is adjusted without having to remove the straps. This
action is linked to the headrest that protects the child better in the event of a side impact
while supporting the head.
• The seat can be rotated 360° degrees
and to turn it round to the car door to get the child in and out of the seat more easily.
• The inside of the seat is covered with shock absorbing material.
• It is fitted with adjustable cushion inserts for smaller babies (from 40 to 75 cm).
• The seat has ventilation windows.
• The seat can be reclined in 5 different positions.
EN
24
to install it in the rear or forward facing position
_ 1 Use for children from 40 to 105 cm
Setting up the iXPERT for use from 40 to 105 cm
• To save space, in its original packaging, the iXPERT safety seat comes set up in the
rearward facing position and with the anti-rotation leg folded.
• Unfold the anti-rotation leg. (1a)
• Now it is ready for use.
_ Installing the safety seat in the car
• Pull the two ISOFIX anchors (5) fully out by pressing the buttons on each anchor (5a) and
sliding them out. (1b)
• In some cars, the ISOFIX anchors are difficult to access or are hidden between the vehicle
seat foam. Guides (7) are supplied with the safety seat to make it easier to locate the anchor
points, insert them before the next step.
• Guide the anchors towards the axles in your car and press until both sides both sides are
locked, two green signals displayed on both buttons (5b) will indicate that they are locked.
If one or both the signals are red, try again. (1c)
• Press the base (3) against the backrest of the vehicle seat until it is held firmly in place. (1d)
• Release the leg height lock by pressing the buttons (4b). Extend the leg until it touches the
floor of the vehicle. Lift the safety seat until the buttons (4b) lock again, the green signal will
be displayed on the base of the leg (4c). (1e)
EN
25