Lenco Classic Phono TCD-2551 Manual De Usuario página 14

USB OPERATION
⚫ Press the CD/USB/BT button twice to enter USB mode. The '---' and USB icon will be
shown.
⚫ Insert a USB flash device into the USB socket.
⚫ PLAY/PAUSE, DN/UP and stop functions are the same as CD functions.
PLAYING IN MP3 MODE (CD/USB)
⚫ Press PLAY/PAUSE button to start or pause playback selected track.
⚫ While playing the song, the song number and folder number of the selected track will
be shown in the display.
⚫ You can stop the playback at any time by pressing the STOP button.
TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD/USB MODE
During CD/USB playback press UP/F.F (
remote control repeatedly to change track. To rapidly search forward or backwards within a track
press and hold UP/F.F (
remote control.
USB RECORDING
⚫ CD recording
Insert USB flash drive into the USB socket. Then press CD/USB/BT button. Place CD into the
CD drawer and play the track which will be recorded. Press RECORD button twice to start
recording. If all CD is played, Then all tracks will be recorded.
NOTE: Recording will stop when the STOP button is pressed.
⚫ MP3 DISC recording
Insert USB flash drive into the USB socket. Then press CD/USB/BT button. Place CD with
MP3 files into the CD drawer and play the MP3 track which will be recorded. Press RECORD
button twice to start recording. If all MP3 files is played, Then all tracks will be recorded.
NOTE: Recording will stop when the STOP button is pressed.
⚫ Cassette recording
) or DN/F.R (
) or DN/F.R ( ) button. To skip 10 tracks press TRACK+10 on the
) button on the unit front panel or on the
14