Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
The Portable Blender will
not turn ON . The white
POWER ON/OFF button
is off.
The POWER ON/OFF
button is flashing red.
The Portable Blender will
not turn ON .
The blender motor
rotates very slowly .
17828,17831,17832_BellaxSoYummy_Target_Portable Blender_V4_R3_IM.indd 8
17828,17831,17832_BellaxSoYummy_Target_Portable Blender_V4_R3_IM.indd 8
CAUSE
• The blender jar is not
assembled correctly .
• Battery needs to be
charged .
• The POWER ON/OFF button
was pressed once .
• Battery needs to be
charged .
• The motor is blocked .
Blades cannot rotate .
• Battery temperature is
too high .
• Blending jar is overloaded .
SOLUTION
• The blending jar interlock system is not engaged .
The Portable Blender will not turn ON unless the
blending jar is properly tightened onto the base .
• Charge battery .
• To begin the BLEND cycle, you MUST press the
POWER ON/OFF button twice .
• Charge battery .
• Remove some of the blender jar contents .
Continue blending .
• Flip the Portable Blender upside down . Shake
vigorously to re-distribute ingredients . Continue
to BLEND .
• Flip the Portable Blender to upside down and
rest the unit on its lid .
• Turn the base counter-clockwise and lift base up
and out of the blending jar .
• Remove the blockage . Replace the base . Make
sure the base is screwed securely into the
blending jar . Flip the Portable Blender to right-
sideup before continuing to BLEND .
• Allow the Portable Blender to rest before
continuing .
• Remove half of the ingredients and continue to
BLEND .
• Add liquid to the blending jar and continue to
BLEND .
8
2023-10-20 9:49 AM
2023-10-20 9:49 AM
Publicidad
