Publicidad
Idiomas disponibles
Idiomas disponibles
7 .
Charge unit for 3 .5 hours . When the POWER ON/OFF button illuminates solid white, the Portable Blender is
fully charged . A full charge will do up to 30 blends .
8 . Remove the charging cable and store in a dry, designated safe place before use .
OPERATING INSTRUCTIONS
1 .
Install the blending jar until the line on the back of the motor base is
aligned with the line on the back of the blending jar . The white illuminated
POWER ON/OFF button will flash 3 times. (Figure 1)
IMPORTANT: The Portable Blender should not be operated when the
blending jar is empty . Add liquids or food to the blending jar before
blending .
WARNING: NEVER BLEND hot liquids exceeding 120°F/49°C .
2. Add liquid ingredients to the blending jar first. Place the remaining
ingredients on top .
WARNING: NEVER overfill the jar. NEVER add ingredients past the MAX fill
line .
3 .
Attach the lid to the blending jar . Turn clockwise until tightly sealed .
IMPORTANT: As a safety precaution, your Portable Blender is equipped with a blending jar interlock system .
The Portable Blender will not turn ON unless the blending jar is properly sealed onto the motor base .
WARNING: To avoid personal injury, leakage, or damage to the Portable Blender, make sure the blending
jar is not overloaded and the lid is tightly sealed onto the blending jar before pressing the POWER ON/OFF
button .
BLEND MODE
1 .
Press the POWER ON/OFF button twice to begin . The BLEND cycle is timed and after 30 seconds it will turn
OFF automatically . Repeat as needed .
2 . To turn the Portable Blender OFF at any time, press the POWER ON/OFF button once to STOP blending
operation .
3.
Check results and if necessary, stir in liquids: water, juice, stock, coffee, alcohol, or mixer.
4 . Press the POWER ON/OFF button twice to resume blending .
5 . Blend until the desired consistency is reached .
WARNING: If the battery temperature gets too high, the POWER ON/OFF button will turn red and begin
flashing. The Portable Blender will turn OFF. Allow the Portable Blender to rest before continuing.
6 . Your Portable Blender is perfect for travel . Make sure the lid is tightly sealed onto the blending jar for use
on-the-go .
BLEND TECHNIQUE
NOTE: For best results, remove ice cubes from freezer for 5 to 10 minutes before using . Frozen fruit should be cut
into uniform, small chunks .
1.
To BLEND frozen fruits or ice cubes add liquids: water, juice, stock, coffee, or mixer and a handful of frozen
fruits or ice cubes .
2 . Attach the lid, turn clockwise until tightly sealed .
3.
For more difficult blending, flip the Portable Blender upside down. Press POWER ON/OFF button twice to
BLEND . Flip the Portable Blender back to right-side-up . BLEND until smooth .
4 . Add additional liquid, chunks of frozen fruit or cubes . Shake the Portable Blender to distribute contents and
BLEND until the desired consistency is reached .
PULSE MODE
1 .
The PULSE mode is perfect when a chunkier consistency is desired . PULSE to prepare guacamole, salsa,
hummus, chopped ice .
2 . Press and hold the POWER ON/OFF button for 2 seconds to initiate the PULSE mode . The white illuminated
POWER ON/OFF button will begin to flash.
3 .
To PULSE, press the POWER ON/OFF button . Blades will stop when the button is released . PULSE until the
desired consistency is reached .
17828,17831,17832_BellaxSoYummy_Target_Portable Blender_V4_R3_IM.indd 6
17828,17831,17832_BellaxSoYummy_Target_Portable Blender_V4_R3_IM.indd 6
Figure 1
6
2023-10-20 9:49 AM
2023-10-20 9:49 AM
Publicidad
