Taurus AIR FRY DIGITAL 7S Instrucciones De Uso página 8

EN
English (Original instructions)
AIR FRY
AIR FRY DIGITAL 7S
DESCRIPTION
A Digital control panel
B Main housing
C Handle
D Air outlet
E Non-stick tray
F Frying Pot
G Supply cord
CONTROL PANEL
1 LCD
2 Temperature selector buttons
3 Program selector
4 Time selector buttons
5 Power button
6 Fan indicator
7 Temperature/time indicators
8 Program indicators
9 Work indicator
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.
USE AND CARE
• Fully extend the appliance's supply cord before each use.
• Do not use the appliance if the parts or accessories are
not properly fitted.
• Do not use the appliance if the accessories attached to it
are defective. Replace them immediately.
• Do not use the appliance when empty.
• Do not use the appliance if the timer switch does not work
properly.
• Do not move the appliance while in use.
• To keep the non-stick treatment in good condition, do not
use metal or pointed utensils on it.
• Do not force the appliance's work capacity.
• Disconnect the appliance from the mains when not in use
and before undertaking any cleaning task.
• Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
• Do not store or transport the appliance if it is still hot.
• Never leave the appliance connected and unattended if
it is not in use. This saves energy and prolongs the life of
the appliance.
• Use only utensils appropriate to support high
temperatures.
• As a reference, in the annexed table, you will find a
recommendation on the cooking temperature and time for
several meals.
INSTRUCTIONS FOR USE
BEFORE USE
• Please read the "Safety advice and warnings" booklet
carefully before first use.
• Make sure that the entire product's packaging has been
removed.
• Before using the product for the first time, clean the
parts that will come into contact with food in the manner
described in the «Cleaning» section.
USE
• Unroll the supply cord completely before plugging it in.
• Connect the appliance to the mains.
• Take the frying pot out of the fryer carefully.
• Note: manipulate the frying pot using the frying pot
handle. Don't touch the frying pot when it's hot.
• Put the ingredients you want to fry inside the frying pot.
• Introduce the frying pot inside the fryer and press the
power button.
• Once the frying pot is properly placed in the main
housing, the power light will be illuminated.
• Adjust the temperature and time using the according
buttons, or select one of the 8 preset modes, as the initial
temperature and time will be 200 ºC and 15 minutes.
• Select the power button to start the cooking process.
• Press the power key for 3 seconds to stop the entire
device during cooking. "OFF" will show on the screen.
The "OFF" light goes out, the fan stops working 20
seconds later, and the entire device totally stops working.
• Note: During cooking, you can use the buttons to control
the pause and start of cooking and set the cooking
parameters.
TIME AND TEMPERATURE
• If you wish, you can also change the temperature and
time settings using time and temperature selectors.
PRESET PROGRAMS
• This appliance has 8 preset programs.
• To select a program, press the program selector button.