Using The Rangetop; Surface Burners - Thermador PCG304G Manual De Uso Y Cuidado

Using the Rangetop

Surface Burners

®
Sealed STAR Burners
Each burner has a unique QuickClean
allows the burner and area around the burner to be easier
to clean.
On all models, the two left burners have the exclusive
®
ExtraLow feature, any remaining burners are Standard.
Each STAR burner has its own control knob.
ExtraLow ExtraLow ExtraLow Standard Standard Standard
ExtraLow ExtraLow ExtraLow Standard Standard Standard
English 8
®
Figure 2: STAR Brass Burner Base
®
base feature which
Standard Standard Standard
Standard Standard Standard
Figure 3: Burner Power Features
Control Knobs
Typically, a pair of control knobs is located on the control
panel, directly in front of the pair of gas STAR burners they
control — with one gas burner positioned in front of the
other on the rangetop.
The symbol near each burner control knob identifies the
burner position on the rangetop.
Left Rear Center Rear
Left Front Center Front
Operation of the STAR Burners
1. Press in on the knob and turn it counter-clockwise to
the HI setting.
• The igniter for the selected burner sparks to ignite
the burner.
• After flame ignition, the igniter stops sparking.
2. Rotate the knob to any flame setting between HI and
SIM.
• A blue light is positioned between the burner
controls. The light turns on when the control knob
is rotated to an active mode. It is off when the
control knob is in the OFF position.
Grill Rear Right Rear
Griddle
Grill Front Right Front
Figure 4: Rangetop Symbols