Publicidad
Idiomas disponibles
Idiomas disponibles
Below is the index of the menus and their selectable values.
MAIN MENU
(FUNCTIONS)
Swipe
LED
the card
flashes
"PROG"
Orange
* The Backup and Restore options are performed directly on a flash drive (FAT32) connected to the USB of the reader.
Before the Restore process, the LED/Buzzer of the equipment will flash/beep briefly for 10 seconds; if the "PROG"
card is approached during this time, the Restore will be canceled. The reader LED will flash orange while the Backup
or Restore process is running.
19 - ACESS SETTINGS THROUGH THE WEB SERVER
Advanced settings are available on the equipment's web server, which can be accessed via Internet browser:
20 - PRODUCT APPROVAL
Resolution No. 680 - "This equipment is not entitled to protection against harmful interference and may not cause
30
Choose the func-
tion (according to
the card
the LED flashing)
"PROG"
1st - Relay time
2nd - Door sensor
3rd - Wiegand
output
4th - CAN address
5th - USB Backup *
6th - Restore USB*
IP
Access
User
Password
SUB MENU
(FUNCTION VALUES)
Swipe
LED flashes
Cyan
Magenta
Yellow
White
Orange
Orange
FACTORY SETTINGS
192.168.0.15
http://192.168.0.15/
admin
nice
ENGLISH
Choose the value
of the function
the card
(according to the
"PROG"
LED flashing)
1st - Off
2nd - 1 second
3rd - 3 seconds
4th - 5 seconds
5th - 10 seconds
6th - On/Off toggle
mode
1st - Off
2nd - 15 seconds
3rd - 60 seconds
4th - 120 seconds
5th - 240 seconds
1st - Wiegand 26
2nd - Wiegand 34
3rd - Wiegand 66
1st - Address 1
2nd - Address 2
3rd - Address 3
4th - Address 4
5th - Address 5
6th - Address 6
7th - Address 7
8th - Address 8
-
-
Swipe
LED
flashes
Green
(exits menu)
Green
(exits menu)
Green
(exits menu)
Green
(exits menu)
-
-
-
-
Publicidad
