Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 SAFETY SIGNS
The machine has various symbols on
it (Fig. 2). They are used to remind the
operator of the behaviour to follow to use it
with the necessary attention and caution.
Meaning of symbols:
WARNING! DANGER! The
failure to use this machine
correctly can be hazardous
for oneself and others.
WARNING! Read the instruction
manual before using the machine.
Use head protection devices and
goggles.
Use thick non-slip
protective gloves.
Do not leave the machine in the
rain (or in damp conditions)
Danger of cutting yourself!
Keep hands and feet
away from the blades.
PROJECTION HAZARD! Be
careful of flying debris projected
by the cutting means, that
can cause serious injuries to
persons or damage to things.
PROJECTION HAZARD! Keep
people or pets at least 15 m
away when using the machine!
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised service centre.
3.3 PRODUCT IDENTIFICATION LABEL
The product identification label provides
the following data (Fig. 1 ):
1. Sound power level
2. Conformity marking
3. Month/Year of manufacture
4. Type of machine
5. Serial number
6. Name and address of Manufacturer
7. Article code
8. Power voltage
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
IMPORTANT Quote the information on the
product identification label whenever you contact
an authorised service centre.
IMPORTANT The example of the
Declaration of Conformity is provided
on the last pages of the manual.
3.4 MAIN COMPONENTS
The machine is composed of a series
of main components that have the
following functions (Fig.1 ):
A. Motor: supplies the drive power
to the cutting means.
B. Control Rod: hand grip fitted with
the main throttle controls.
C. Rear hand grip: support hand grip
located on the rear of the control rod. This
should be grasped using the right hand.
D. Front hand grip: support hand grip
located on the control rod. This should
be grasped using the left hand.
E. Hedge trimmer device device used
for trimming and pruning trees. Already
mounted on the rod when supplied.
F.
Harness: a fabric belt which, placed
over the shoulders, helps support the
weight of the machine during work.
G. Blade (cutting means): the element
designed to cut the vegetation.
H. Blade guard (for machine transport and
handling): protects against accidental
contact with the cutting devices
that can cause serious injuries.
I.
Battery: (if non provided with the machine,
see chap. 15 "accessories upon request"):
device that supplies electric current to the
tool; its specifications and regulations for
use are described in a specific manual.
EN - 6
Publicidad
